Submersible Sewage Pumps |
Hitec Pump Industries have designed these pumps to handle large quantities of solids thereby accomplishing dewatering as well as desilties ! The pump is to prevent frequent clogging of the sewer system due to sedimention of mud, Sludge, Rags, Plastics, Cotton waste etc., Maximum depth is 10 mtr. Liquid temperature is 40o C
|
|
Features -
Power supply -- |
415v + 6%, 3 Phase, 50Hz 3% AC supply. It is also availabe in other combination. |
Motor -- |
Squirrel cage induction motor of continuous rating having ' F ' Class insulation with Bi-mettallic switches embeded in stator winding to protect against over heating. |
Ball Bearing -- |
Double rao angular contact bearing at lower side to carry high trust and radial loads, Deep Groove single rao ball bearing on upper side. These Bearings are filled with special grease to withstand high temperature. |
Power Cable -- |
Water Proof / Oil proof PVC/ EPR insulated double sheathed copper conductor flexible cable of appropriate size in 15 mtr. length. |
Mechanical Seal -- |
Double seals in tandem arrangment immersed in oil to ensure long life maintenance free operation. |
Application -- |
Pumping of raw unscreened Sewage, Strom Water, Hotel, Lift irrigation, Paper Mills, ETP, Drainage System etc. |
|
 |
|
|
|
